Configuring The Igmp Proxy - Patton electronics SmartWare R.3.20 Software Configuration Manual

SmartWare Software Configuration Guide
Mode: Context IP
Step Command
node (ctx-ip)[ctx- name ]#
1
interface <if-name>
2 node(if-ip)[if- name ]# igmp
interface-type proxy-
upstream
3 node (ctx-ip)[ctx- name ]#
interface <if-name>
node (if-ip)[if- name ]# igmp
4
interface-type proxy-
downstream
5

Configuring the IGMP Proxy

Go to the IP interface, which shall act as the IGMP proxy
upstream interface
Define the interface as the IGMP proxy upstream interface
Go to an IP interface, which shall act as an IGMP proxy down-
stream interface
Define the interface as an IGMP proxy downstream interface
Repeat steps 3 & 4 for any additional interface, which shall act
as an IGMP proxy downstream interface.
10 • IP interface configuration
Purpose
121