Configuring Radius Accounting - Patton electronics SmartWare R.3.20 Software Configuration Manual

SmartWare Software Configuration Guide
node(cfg)#
Configuring RADIUS accounting
The RADIUS accounting functionality can be added to a call-router configuration by inserting an AAA call-
control service between two call-router elements. Any call that is then routed through the AAA service will
cause call detail records (CDRs) to be sent to the radius server. Normally an accounting start record is sent
when the call is connected and the accounting stop record is sent, when the call is disconnected. If enabled, the
AAA service is also able to send interim update records, after a specified interval. The AAA service can include
the following standard RADIUS attributes in the CDRs:
ATTRIBUTE Acct-Status-Type
ATTRIBUTE Acct-Session-Time
ATTRIBUTE Acct-Session-Id
ATTRIBUTE NAS-Identifier
ATTRIBUTE Called-Station-Id
ATTRIBUTE Calling-Station-Id
Additionally, the following vendor specific attributes are available to support voice service specific information:
#
# dictionary.patton
#
VENDOR Patton
#
# Name
#
ATTRIBUTE Setup-Time 32 string Patton a)
ATTRIBUTE Connect-Time 33 string Patton a)
ATTRIBUTE Disconnect-Time 34 string Patton a)
ATTRIBUTE Disconnect-Cause 35 integer Patton b)
ATTRIBUTE Disconnect-Source 36 string Patton c)
ATTRIBUTE Called-Unique-Id 48 string Patton d)
ATTRIBUTE Called-IP-Address 49 ipaddr Patton
ATTRIBUTE Called-Numbering-Plan 50 string Patton e)
ATTRIBUTE Called-Type-Of-Number 51 string Patton f)
ATTRIBUTE Calling-Unique-Id 80 string Patton d)
ATTRIBUTE Calling-IP-Address 81 ipaddr Patton
ATTRIBUTE Calling-Numbering-Plan 82 string Patton e)
ATTRIBUTE Calling-Type-Of-Number 83 string Patton f)
ATTRIBUTE Calling-Presentation-Indicator 88 string Patton g)
ATTRIBUTE Calling-Screening-Indicator 89 string Patton h)
a) Format of timestamps is "WWW MMM DD HH:MM:SS YYYY" Example: "Wed Jun 15 09:20:55 2005"
b) ITU-T Q.931 cause value (1-127)
c) { originator | terminator | internal }
d) Contains the Call-Id for SIP or H.323
e) { e.164 | data | telex | national | private }
f) { international | national | network specific | subscriber | abbreviated }
g) { allowed | restricted | unavailable }
h) { user-provided, not screened | user-provided, verified and passed | user-provided, verified and failed | network provided }
Note
The subset of information elements that is actually included in a CDR is
dependant on the type of call and the information already available at the
time the CDR is sent.
RADIUS configuration
1768
Id Type Vendor Note
8 • RADIUS Client Configuration
100