Configuration File; System Image Handling Task List; Displaying System Image Information - Patton electronics SmartWare R.3.20 Software Configuration Manual

SmartWare Software Configuration Guide
Memory Regions in
Embedded Software
Remote (TFTP Server)
tftp:
• Configuration
Files
• Batchfiles for
System Image
download
Image / Microcode Download
Figure 8. SmartNode memory regions logically defined in SmartWare

System image handling task list

To load and maintain system images, perform the tasks described in the following sections:
•

Displaying system image information

• Copying system images from a network server to the Flash memory (see
• Copying the driver software from a network server to the Flash memory (see

Displaying system image information

This procedure displays information about system images and driver software
Mode: Administrator execution
Step Command
1 show version

System image handling task list

Storing the current Running Configuration remotely
Configuration File Upload
Local
Persistent
flash:
• Application Image
• Bootloader Image
• Microcode Image
Configuration File Download
Lists the system software release version and the current hardware configuration. If
you have just completed a download of new system software from the tftp server,
you must execute the
reload
software. This applies equally to driver software.
Storing the current Configuration locally
nvram :
• Factory
Configuration
"factory-config"
(read-only)
• Startup
Configuration
"startup-config"
• User specific
Configuration
"user-config"
Only on Startup to execute the
Startup or Factory Configuration
page
Purpose
command in order to be running with the new system
5 • System image handling
Volatile
system:
• current Running
Configuration
"running-config"
63)
page 64)
62