Troubleshooting - Patton electronics SmartWare R.3.20 Software Configuration Manual

SmartWare Software Configuration Guide
Mode: gateway sip <sip>
Step
1 [ name ] (gw-sip)[ gw-name ]# transaction
timeout <seconds>

Troubleshooting

You can display basic status information of the SIP gateway and the registration state of its users using the fol-
lowing command:
Mode: Configure
Step
1
node (gw-sip)[sip]# show gateway sip sta-
tus [detail]
Example: Display SIP gateway status information
The following example shows how to display SIP gateway status information and a sample output of the com-
mand.
node(cfg)#show gateway sip status
SIP Gateway: sip
================
State:Up
User Agent:0xb69ef0
Local Address:172.16.32.19:5060
Allocated Endpoints:0
Allocated Sessions:0
Allocated Audio Datapath Controllers:0
The SIP gateway also provides several debugging monitors to observe the dynamic behavior of the SIP gateway.
These monitors allow efficient troubleshooting of SIP problems. The most often used monitors are listed in the
Gateway configuration task list
Command
Command
39 • SIP gateway configuration
Purpose
Sets the transaction timeout to the
specified value.
Purpose
Displays SIP gateway status information. The
detail parameter is a number in the range 0
to 5 and indicates how much detail should
be displayed.
502