Displaying Serial Port Information; Displaying Frame Relay Information - Patton electronics SmartWare R.3.20 Software Configuration Manual

SmartWare Software Configuration Guide

Displaying serial port information

The following example shows the commands used to display serial port configuration settings.
HDLC Driver: 0x8496b8
=====================
Slot:
Number of Ports:
HDLC Driver: 0x8496b8
=====================
Slot:
Number of Ports:
Port: serial 0 0 0
------------------
State:
Configuration
Hardware Port:
Port Type:
CRC:
Transmit Edge:
Max Frame Length:
Baudrate:
Recv Threshold:

Displaying Frame Relay information

Since Frame Relay configuration for the serial interface is complex and requires many commands, it is helpful
to list the frame relay configuration on screen.
This procedure describes how to display the Frame Relay configuration settings for the serial interface.
Mode: Port serial
Step
node (prt-ser)[ slot/port ]#show framerelay Displays Frame Relay information.
1
Example: Displaying Frame Relay information
The following example shows the commands used to display Frame Relay configuration settings.
node>enable
node#configure
node(cfg)#show framerelay
Framerelay Configuration:
Port LMI-Type
----------------------------------------------------------
serial 0 0 0 ansi
Serial port configuration task list
0
1
0
1
OPENED
X.21
DCE
CRC-16
Normal
1920
64000 bps
1
Command
Keepalive
10
14 • Serial port configuration
Purpose
Fragmentation
disabled
175