Patton electronics SmartWare R.3.20 Software Configuration Manual page 390

SmartWare Software Configuration Guide
Type
calling-e164
called-type-of-number Route calls based on the called party number type. ISDN distinguishes different type of
calling-type-of-number Route calls based on the calling party number type. ISDN distinguishes different type of
called-numbering-plan Route calls based on the called party numbering plan. ISDN distinguishes different
calling-numbering-plan Route calls based on the calling party numbering plan. ISDN distinguishes different
called-name
calling-name
called-ip
calling-ip
called-uri
calling-uri
calling-pi
calling-si
itc
time
date
day-of-week
Besides the header (name and type) a routing table contains multiple entries. Each entry specifies a specific
value of the routing table type and a destination interface and an optional function. When a call arrives at a
routing table, the following procedure is applied:
1. Examine the call property as specified with the routing table type.
2. Select the best matching entry. This means that the key of each of the entries is compared to the call prop-
erty and the entry that matches best is chosen.
3. Execute the entry. This means executing the referenced function of the entry if specified, and routing the
call to the specified destination interface, table or service.
Procedure: To create a routing table and add entries
Call router configuration task list
Table 12. Routing table types (Continued)
Route calls based on the calling party E.164 number. Entries of calling-e164 tables can
use wildcards to summarize routes.
numbers.
numbers.
numbering plans.
numbering plans.
Route calls based on the display name of the called party.
Route calls based on the display name of the calling party.
Route calls based on the signaling IP address of the destination VoIP peer.
Route calls based on the signaling IP address of the origination VoIP peer.
Route calls based on the URI of the destination VoIP peer (for SIP calls: the To-URI).
Route calls based on the URI of the origination VoIP peer (for SIP calls: the From-URI).
Route calls based on the presentation indicator.
Route calls based on the screening indicator.
Route calls based on the information transfer capability (bearer capability) to distin-
guish speech from data calls.
Route calls based on the current time of day. .
Route calls based on the current date.
Route calls based on the current day of week.
33 • Call router configuration
Description
390