Patton electronics SmartWare R.3.20 Software Configuration Manual page 452

SmartWare Software Configuration Guide
The following example shows how to display the tone-set profile.
node#show profile tone-set test
Tone Profile: test
==================
Used:
DTMF Duration:
DTMF Interspace:
Tones
-----
dial-tone:
ringback-tone:
hold-tone:
waiting-tone:
confirmation-tone:
busy-tone:
congestion-tone:
release-tone:
special-information-tone:
special-dial-tone:
Example: The following example shows how to configure a tone-set profile for UK and apply it to the isdn
interface bri0.
Create the call-progress-tone profiles:
node(cfg)#profile call-progress-tone dial-UK
node(pf-callp)[dial-UK]#play 5000 350 0 440 0
node(pf-callp)[dial-UK]#profile call-progress-tone alerting-UK
node(pf-callp)[alertin~]#play 400 400 0 450 0
node(pf-callp)[alertin~]#no play 200
node(pf-callp)[alertin~]#play 400 400 0 450 0
node(pf-callp)[alertin~]#no play 2000
node(pf-callp)[alertin~]#profile call-progress-tone busy-UK
node(pf-callp)[busy-UK]#play 400 400 0
node(pf-callp)[busy-UK]#no play 400
node(pf-callp)[busy-UK]#exit
Create the tone-set profile:
node(cfg)#profile tone-set UK
node(pf-tones)[UK]#map call_progress_tone dialtone dial-UK
node(pf-tones)[UK]#map call_progress_tone alertingtone alerting-UK
node(pf-tones)[UK]#map call_progress_tone busytone busy-UK
node(pf-tones)[UK]#exit
Assign the tone-set to the isdn interface bri0
node(cfg)#context cs
Tone configuration task list
by 0 module(s)
80ms
80ms
belgianSpec
defaultAlertingtone
defaultHoldtone
defaultWaitingtone
defaultConftone
defaultBusytone
defaultCongestiontone
defaultReleasetone
defaultSItone
defaultSDtone
34 • Tone configuration
452