Adventnet Trap Details Window Of Trapviewer; Details Available In The Trap Details Window - Patton electronics SmartWare R.3.20 Software Configuration Manual

SmartWare Software Configuration Guide
- Message that by default has the object identifier format (sequence of numeric or textual labels on the SNs
along a path from the root to the object) of the trap if any, or it is blank.
• The details of the traps can be viewed by clicking the Trap Details button or right click the trap in the trap
table and select the option View Trap Details.
The various details available in the Trap Details window are listed in
Trap Details
The TimeStamp is a 32-bit unsigned value indicating the number of hundredths-of-a-second
TimeStamp
that have elapsed since the (re)start of the SNMP agent and the sending of the trap. This
field shows the value stored in the MIB-II sysUpTime variable converted into hours, minutes
and seconds.
This field shows the OID of the management enterprise that defines the trap message. The
Enterprise
value is represented as an OBJECT IDENTIFIER value and has a variable length.
Generic Type The Generic type value is categorized and numbered 0 to 6. They are 0-coldStart, 1-warm-
Start, 2-linkDown, 3-linkUp, 4-authenticationFailure, 5-egpNeighborLoss. The trap type
value 6 is identified as enterprise-specific value. This field shows the value based on the
type of trap.
Specific Type The specific trap type indicates the specific trap as defined in an enterprise-specific MIB. If
the Generic type value is 6 then, this field shows a value greater than 0. If the generic type
value is a value other than 6, then the field shows a value 0. This field can have values
from 0 to 2147483647.
This is a text field. By default, this field will always contain the Varbinds in the Trap PDU.
Message
This can be substituted with text.
This field shows the Severity or the intensity of the trap. They could be 0-All, 1-Critical, 2-
Severity
Major, 3-Minor, 4-warning, 5-Clear and 6-info.
Using the AdventNet SNMP utilities
Figure 37
Figure 37. AdventNet Trap Details window of TrapViewer
Table 8. Details available in the Trap Details window
show the screen of such a trap details window.
table 8:
Description
19 • SNMP configuration
231