Sample Configurations; Ppp Over Ethernet (Pppoe); Without Authentication, Encapsulation Multi, With Napt; With Authentication, Encapsulation Pppoe - Patton electronics SmartWare R.3.20 Software Configuration Manual

Software for smartnode series
Table of Contents

Advertisement

SmartWare Software Configuration Guide
Service:
Access-Concentrator:
State:
Sent Initiations:
Sent Requests:
Peer Session-ID:
Peer MAC-Address:
Sample configurations

PPP over Ethernet (PPPoE)

Without authentication, encapsulation multi, with NAPT

profile napt WAN
context ip router
interface normal_ip_interface
ipaddress 172.16.1.1 255.255.0.0
interface ppp_interface
ipaddress unnumbered
point-to-point
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
use profile napt WAN
context ip router
route 0.0.0.0 0.0.0.0 ppp_interface 0
port ethernet 0 0
encapsulation multi
bind interface normal_ip_interface
no shutdown
pppoe
session green
bind interface ppp_interface
no shutdown

With authentication, encapsulation PPPoE

context ip router
interface ppp_interface
ipaddress unnumbered
point-to-point
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
subscriber ppp joe_example
dial out
authentication pap

Sample configurations

Opened
1
1
3786
00:01:02:B8:4E:E4
24 • PPP configuration
279

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartware release 3.20

Table of Contents