Configuring The Igmp Proxy - Patton electronics SmartWare R.3.20 Software Configuration Manual

SmartWare Software Configuration Guide
Example: Debug ARP output
node(cfg)#debug arp
node(cfg)#ping 10.9.10.11
Sending 5, 56 bytes, ICMP echo requests to 10.9.10.11:
17:25:40 ARP
17:25:40 ARP
00:A0:BA:00:92:4F
17:25:40 ARP
00:A0:BA:00:92:4F
17:25:40 ARP
56 bytes from 10.9.10.11: Time 10ms
17:25:40 ARP
00:09:5B:53:D2:B0
17:25:40 ARP
17:25:40 ARP
00:09:5B:53:D2:B0
% Aborted
Ping statistics for 10.9.10.11:
Packets: Sent 1, Received 1, Lost 0 (0% loss),
RTT: Minimum 10ms, Maximum 10ms, Average 10ms
Example: Display the ARP information.
node(cfg)#show arp
IP Interface eth0:
-----------------------------------------------------------------------------
Remote IP
-----------------------------------------------------------------------------
69.138.216.1
-----------------------------------------------------------------------------
IP Interface eth1:
-----------------------------------------------------------------------------
Remote IP
-----------------------------------------------------------------------------
10.9.10.20
10.9.10.12
10.9.10.2
10.9.10.166
10.9.10.10
10.9.10.11
10.9.10.3
-----------------------------------------------------------------------------
Configuring the IGMP Proxy
To enable the IGMP proxy functionality, you need to define which interface shall be used to receive multicast
streams (upstream interface) and to which interfaces the multicast streams shall be forwarded (downstream
interfaces). The router then listens on the downstream interfaces for IGMP join messages and forwards them
to the upstream interface.

Configuring the IGMP Proxy

> Entry 10.9.10.11: Sending first request
> Tx ARP Request: Who has 10.9.10.11 tell 10.9.10.1 at
> Rx ARP Reply: 10.9.10.11 is at 00:50:04:74:94:6C tell 10.9.10.1 at
> Entry 10.9.10.11: Updated by 00:50:04:74:94:6C
> Rx ARP Request: Who has 10.9.10.1 tell 10.9.10.3 at
> Entry 10.9.10.3: Updated by 00:09:5B:53:D2:B0
> Tx ARP Reply: 10.9.10.1 is at 00:A0:BA:00:92:4F tell 10.9.10.3 at
Remote MAC
00:01:5C:22:46:C2
Remote MAC
00:11:1A:4C:B1:1C
00:02:2D:BB:13:FB
00:09:5B:6F:93:06
00:09:5B:41:30:33
00:80:AD:78:BB:DD
00:50:04:74:94:6C
00:09:5B:53:D2:B0
State TTL
reachable 342s
State TTL
reachable 408s
reachable 326s
reachable 518s
stale 556s
reachable 394s
reachable 433s
reachable 521s
10 • IP interface configuration
TxReq RxRep Usage
2 2 12
TxReq RxRep Usage
1454 1451 67939
533 571 16819
0 515 1054
2 9 2277
0 2 1982
1 1
0 2 18
2
120