Patton electronics SmartWare R.3.20 Software Configuration Manual page 548

SmartWare Software Configuration Guide
circuit mode - 64kBit/s - G.711 A-law
Calling party number : 55
unknown number - unknown numbering plan
presentation allowed - user provided not screened
Called party number : 50
unknown number - unknown numbering plan
High layer compatibility : telephony
CCITT
19:17:38 ICC
19:17:38 ICC
19:17:38 ICC
19:17:38 ICC
19:17:38 ICC
IND
19:17:38 ICC
19:17:44 ICC
19:17:44 ICC
Connected number : 50
unknown number - unknown numbering plan
presentation allowed - user provided not screened
19:17:44 ICC
IND
19:17:44 ICC
19:17:44 ICC
unit(cfg)#
unit(cfg)#call 55 drop
unit(cfg)#19:19:29
19:19:29 ICC
19:19:29 ICC
Cause : normal call clearing
private network serving local user - CCITT - Q.931
Progress indicator : inband information available
private network serving local user - CCIT
Explanation:
•
unit(cfg)#call 55 dial 50 dest-interface TERMINAL
the interface TERMINAL. If a phone connected to the port that binds to interface TERMINAL has MSN
50 configured, it will start to ring. This is the case in our example.
• You just have verified that ISDN layer1–3 and the context CS interface TERMINAL are configured so that
a call with called-party 50 can be handled. If this is not the case (no response or a RELEASE message), con-
tinue debugging ISDN signaling.
•
unit(cfg)#call 55 drop
You can proceed as in this example with any other context CS interface, also for VoIP protocols like SIP
and H.323.
Debugging call signaling
> [TERMINAL-00df2760] Set state to CALL PRESENT
> [TERMINAL-00df2760] State: CALL PRESENT, Event: PEER CONNECTED
> [TERMINAL] << Message: primitive=31
> [TERMINAL-00df2760] << ALERTING (DSS1 Ntwk)
> [TERMINAL-00df2760] State: CALL PRESENT, Event: TERMINAL ALERTING
> [TERMINAL-00df2760] Set state to CALL RECEIVED
> [TERMINAL] << Message: primitive=33
> [TERMINAL-00df2760] << CONNECT (DSS1 Ntwk)
> [TERMINAL-00df2760] State: CALL RECEIVED, Event: TERMINAL CONNECT
> [TERMINAL-00df2760] Set state to ACTIVE
> [TERMINAL-00df2760] >> CONNECT ACKNOWLEDGEMENT (DSS1 Ntwk)
ICC > [TERMINAL-00df2760] State: ACTIVE, Event: PEER RELEASED
> [TERMINAL-00df2760] Set state to DISCONNECT INDICATION
> [TERMINAL-00df2760] >> DISCONNECT (DSS1 Ntwk)
: Drops the call initiated with the
: Dial the number 50, which calling-party 55 to
command.
dial
42 • VoIP debugging
548