Patton electronics SmartWare R.3.20 Software Configuration Manual page 538

SmartWare Software Configuration Guide
unit(cfg)#call 123456 dial 987654321 dest-interface PSTN
unit(cfg)#22:03:06
22:03:06 ICC
22:03:06 ICC
Bearer capability : speech - CCITT
circuit mode - 64kBit/s - G.711 A-law
Calling party number : 123456
unknown number - unknown numbering plan
presentation allowed - user provided not screened
Called party number : 987654321
unknown number - unknown numbering plan
High layer compatibility : telephony
CCITT
22:03:06 ICC
22:03:06 ICC
22:03:06 ICC
22:03:06 ICC
22:03:06 ICC
22:03:06 ICC
unit(cfg)#call 123456 drop
unit(cfg)#22:03:14
RELEASED
22:03:14 ICC
22:03:14 ICC
Cause : normal call clearing
private network serving local user - CCITT - Q.931
Progress indicator : inband information available
private network serving local user - CCITT
22:03:14 ICC
22:03:14 ICC
22:03:14 ICC
IND
22:03:14 ICC
22:03:14 ICC
22:03:14 ICC
22:03:14 ICC
22:03:14 ICC
Explanation:
• Place a call on the command line using the line
. The calling party number is 123456 and the called party number 987654321. Replace
interface PSTN
the called party with your mobile phone number, or any other number you know is reachable over
the interface.
• Verify the called party number in the SETUP message on the consecutive lines.
• The line
22:03:06
party is ringing now, and has sent back the ALERTING message to us. This means that the ISDN layer 1, 2,
3 and that the ISDN signaling works.
Debugging call signaling
ICC > [PSTN] Added endpoint PSTN-00b70a20
> [PSTN] NEW CALL. Allocated Endpoint PSTN-00b70a20
> [PSTN-00b70a20] >> SETUP (DSS1 User)
> [PSTN-00b70a20] Set state to CALL PRESENT
> [PSTN-00b70a20] State: CALL PRESENT, Event: PEER CONNECTED
> [PSTN] << Message: primitive=31
> [PSTN-00b70a20] << ALERTING (DSS1 User)
> [PSTN-00b70a20] State: CALL PRESENT, Event: PSTN ALERTING IND
> [PSTN-00b70a20] Set state to CALL RECEIVED
ICC > [PSTN-00b70a20] State: CALL RECEIVED, Event: PEER
> [PSTN-00b70a20] Set state to DISCONNECT INDICATION
> [PSTN-00b70a20] >> DISCONNECT (DSS1 User)
> [PSTN] << Message: primitive=50
> [PSTN-00b70a20] << RELEASE COMPLETE (DSS1 User)
> [PSTN-00b70a20] State: DISCONNECT INDICATION, Event: PSTN RELEASE
> [PSTN-00b70a20] Set state to NULL
> [PSTN] CLEARING CALL PSTN-00b70a20
> [PSTN] Removed endpoint PSTN-00b70a20
> [PSTN] Destroying finished calls.
> [PSTN] Destroyed endpoint PSTN-00b70a20
ICC > [PSTN-00b70a20] << ALERTING (DSS1 User)
unit(cfg)##call 123456 dial 987654321 dest-
42 • VoIP debugging
indicates that the called
538