Patton electronics SmartWare R.3.20 Software Configuration Manual page 426

SmartWare Software Configuration Guide
Class
Normal Event
no-user-responding
(Cont.)
no-answer-from-user
subscriber-absent
call-rejected
number-changed
non-selected-user-clear-
ing
destination-out-of-order Drop original call
invalid-number-format
facility-rejected
Call router configuration task list
Table 16. Hunt group drop causes (Continued)
Default Behavior
Cause of the Hunt
Group Service
Drop original call
Drop original call
Drop original call
Drop original call
Drop original call
Drop original call
Drop original call
Drop original call
33 • Call router configuration
Description
The connection fails because the destina-
tion does not respond to the call. This
cause is used when a user does not
respond to a call establishment message
with either an alerting or a connect indica-
tion with the prescribed period of time
allocated.
The destination responds to the connection
request but fails to complete the connec-
tion within the prescribed time. This cause
is used when the user has provided an
alerting indication but has not provided a
connect indication within a prescribed
period of time.
The remote device you attempted to reach
is unavailable and has disconnected from
the network.
The destination can accept the call but
rejects it for an unknown reason. This
cause indicates that the equipment send-
ing this cause does not wish to accept this
call, although it could have accepted the
call because the equipment sending this
cause is neither busy nor incompatible.
The number used to set up the call is not
assigned to a system. This cause is
returned to a calling user when the called
party number indicated by the calling user
is no longer assigned.
The destination can accept the call but
rejects it because it is not assigned to the
user.
The destination cannot be reached
because of an interface malfunction, and
a signaling message cannot be delivered.
This can be a temporary condition, but it
could last for an extended period.
The connection fails because the destina-
tion address is presented in an unrecog-
nizable format, or the destination address
is incomplete.
The network cannot provide the facility
requested by the user.
426