Configuring An Alternate Voip Profile (Optional) - Patton electronics SmartWare R.3.20 Software Configuration Manual

SmartWare Software Configuration Guide
Mode: Interface SIP
Step
1 node (if-sip)[ if-name ]#remoteip ip-address Defines the IP address or DNS hostname of
Examples: Define the remote SIP entity using an IP address
The following example shows how to associate a SIP interface named MySipIf with a remote SIP entity, which
has the IP address 1.2.3.4
node>enable
node#configure
node(cfg)#context cs
node(ctx-cs)[switch]#interface sip MySipIf
node(if-sip)[mySipIf]#remote 1.2.3.4
Examples: Define the remote SIP entity using a DNS hostname
The following example shows how to associate a SIP interface named MySipIf with a remote SIP entity, which
has DNS hostname sipgw.mycompany.com
node>enable
node#configure
node(cfg)#context cs
node(ctx-cs)[switch]#interface sip MySipIf
node(if-sip)[mySipIf]#remote sipgw.mycompany.com
Configuring an alternate VoIP profile (Optional)
Normally, the VoIP profile defined in the SIP gateway is used for all the calls over that gateway. However, it is
possible to specify an alternate VoIP profile in the SIP interface. In that case the VoIP profile defined within the
VoIP interface is used for all the calls established using that SIP interface instead of the VoIP profile defined in
the SIP gateway.
Procedure: To define an alternate VoIP profile for the SIP interface
Mode: Interface SIP
Step
1
node (if-sip)[ if-name ]#use profile voip pro-
file-name
Example: Configure an alternate VoIP profile
The following example shows how to replace the default VoIP profile of the SIP gateway by an alternate VoIP
profile named myprofile for a SIP interface named MySipIf.
node>enable
node#configure
node(cfg)#context cs
node(ctx-cs)[switch]#interface sip MySipIf
SIP interface configuration task list
Command
Command
32 • SIP interface configuration
Purpose
the remote SIP entity, for which this interface
shall be used.
Purpose
Defines an alternate VoIP profile to be used
for this VoIP interface
373