SmartWare Software Configuration Guide
•
Chapter 39,
"SIP gateway configuration"
describes the tasks involved in its configuration.
•
Chapter 40,
"VoIP profile configuration"
they are used and describes the tasks involved in VoIP profile configuration.
•
Chapter 41,
"PSTN profile configuration"
describes how they are used and the tasks involved in PSTN profile configuration.
•
Chapter 42,
"VoIP debugging"
faults during operation of a SmartNode device.
•
Appendix A,
"Terms and definitions"
throughout this SmartWare Software Configuration Guide.
•
Appendix B,
"Mode summary"
•
Appendix C,
"Command summary"
•
Appendix D,
"Internetworking terms & acronyms"
internetworking.
•
Appendix E,
"Used IP ports & available voice codecs"
voice codecs in SmartWare.
•
Appendix F,
"Notes for upgrading from R3.10 to R3.20"
SmartNode device from Release 3.10 to 3.20.
Precautions
The following are used in this guide to help you become aware of potential problems:
Note
IMPORTANT
on page 491 provides an overview of the SIP gateway and
on page 506 gives an overview of SmartWare VoIP profiles, how
on page 528 gives an overview of SmartWare PSTN profiles, and
on page 532 helps you to localize a system component that is responsible for
on page 553 contains the terms and their definitions that are used
on page 559 illustrates the modes hierarchy.
on page 563 is a command reference.
A note presents additional information or interesting sidelights.
The alert symbol and IMPORTANT heading calls attention to
important information.
on page 566 contains terms and definitions relating to
on page 571 describes the used IP ports and available
on page 618 describes how to upgrade a
About this guide
29