Cs Context Overview; Cs Interface Configuration; Sip Interface Configuration; Call Router Configuration - Patton electronics SmartWare R.3.20 Software Configuration Manual

Software for smartnode series
Table of Contents

Advertisement

SmartWare Software Configuration Guide
Chapter 20,
"SNTP client configuration"
tocol (SNTP) client.
Chapter 21,
"DHCP configuration"
control protocol (DHCP) and describes the tasks involved in its configuration.
Chapter 22,
"DNS configuration"
(DNS) component.
Chapter 23,
"DynDNS configuration"
(DynDNS) service.
Chapter 24,
"PPP configuration"
different link layers.
Chapter 25,
"VPN configuration"
two SmartNodes or between a SmartNode and a third-party device.
Chapter 26,

"CS context overview"

text and its associated components and describes the tasks involved in its configuration.
Chapter 27,
"CS interface configuration"
describes the tasks involved its configuration.
Chapter 28,
"ISDN interface configuration"
tasks involved in their configuration.
Chapter 29,
"FXS interface configuration"
tasks involved their configuration.
Chapter 30,
"FXO interface configuration"
tasks involved in configuring them.
Chapter 31,
"H.323 interface configuration"
H.323 gateways and describes the specific tasks involved in their configuration.
Chapter 32,
"SIP interface configuration"
gateways and describes the specific tasks involved in their configuration.
Chapter 33,
"Call router configuration"
tables and call services and describes the tasks involved in configuring the call router in SmartWare.
Chapter 34,
"Tone configuration"
and tone-set profiles and describes the tasks involved in their configuration.
Chapter 35,
"ISDN port configuration"
describes the tasks involved in configuring ISDN ports in SmartWare.
Chapter 36,
"FXS port configuration"
Node FXS ports and describes the tasks involved in configuring FXS ports in SmartWare.
Chapter 37,
"FXO port configuration"
Node FXO ports and describes the tasks involved in configuring FXO ports in SmartWare.
Chapter 38,
"H.323 gateway configuration"
describes the tasks involved in its configuration.
on page 235 describes how to configure a simple network time pro-
on page 245 provides an overview of the dynamic host configuration
on page 255 describes how to configure the domain name system
on page 259 describes configuring the dynamic DNS
on page 264 describes how to configure the point-to-point protocol over
on page 281 describes how to configure the VPN connections between
on page 300 gives an overview of SmartWare circuit-switching (CS) con-
on page 322 gives an overview of interfaces in the CS context and
on page 331 provides an overview of ISDN interfaces, and the
on page 341 provides an overview of FXS interfaces, and the
on page 348 provides an overview of FXO interfaces and the
on page 360 provides an overview of H.323 interfaces used by
on page 370 provides an overview of SIP interfaces used by SIP
on page 381 provides an overview of call router tables, mapping
on page 446 gives an overview of SmartWare call-progress-tone profiles
on page 454 provides an overview of SmartNode ISDN ports and
on page 469 provides an overview of POTS signaling and Smart-
on page 474 provides an overview of POTS signaling and Smart-
on page 478 provides an overview of the H.323 gateway and
About this guide
28

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartware release 3.20

Table of Contents