Displaying Global Rip Information - Patton electronics SmartWare R.3.20 Software Configuration Manual

SmartWare Software Configuration Guide
node(if-ip)[wan]#show rip interface wan
Interface wan (IP context router):
--------------------------------------------------
send version: 1compatible
receive version: 1or2
learn host: disabled
learn default: disabled
announce host: disabled
announce static: disabled
announce default: disabled
announce self-as-default: disabled
route-holddown: enabled
poison-reverse: disabled
auto-summary: disabled
split-horizon: disabled
default-route-value: 0
--------------------------------------------------

Displaying global RIP information

SmartWare also support displaying global RIP information for the IP router context. This procedure describes
how to display the global RIP information
Mode: Configure
Step
1 node (cfg)#show rip
Example: Displaying global RIP information
The following example shows how to display the global RIP information.
node(cfg)#show rip
RIP information:
rip enabled
RIP configuration task list
listen: disabled
supply: enabled
Command Purpose
Displays the RIP information
17 • RIP configuration
205