Enabling Holding Down Aged Routes; Displaying Rip Configuration Of An Ip Interface - Patton electronics SmartWare R.3.20 Software Configuration Manual

SmartWare Software Configuration Guide
Mode: Interface
Step Command
node (if-ip)[ name ]#rip poison-reverse Enables the poison reverse algorithm on interface name
1
Example: Enabling the poison reverse algorithm
The following example shows how to enable the poison reverse algorithm on IP interface wan.
node(cfg)#context ip router
node(ctx-ip)[router]#interface wan
node(if-ip)[wan]#rip poison-reverse

Enabling holding down aged routes

Holding down or locking aged routes learned from RIP packets on the specified interface helps, if an aged
route cannot be refreshed to a non-aged status but must be deleted and then relearned. Enabling this function
enhances the stability of the RIP topology in the presence of transients.
This procedure describes how to enable holding down of aged routes on an interface
Mode: Interface
Step Command
node (if-ip)[ name ]#rip route-holddown Enables holding down aged routes on interface name
1
Example: Enabling holding down aged routes
The following example shows how to enable holding down of aged routes on IP interface wan.
node(cfg)#context ip router
node(ctx-ip)[router]#interface wan
node(if-ip)[wan]#rip route-holddown
Displaying RIP configuration of an IP interface
Displaying the RIP configuration of an IP interface is useful to list the settings. This procedure describes how
to display the RIP configuration of an interface
Mode: Interface
Step
node (if-ip)[ name ]#show rip interface ifname Displays the RIP binding of an IP interface on
1
Example: Displaying RIP configuration of an IP interface
The following example shows how to display the RIP configuration of IP interface wan.
node(cfg)#context ip router
node(ctx-ip)[router]#interface wan
RIP configuration task list
Command
Purpose
Purpose
Purpose
name
17 • RIP configuration
204