Configure Call Routing Tables; Create A Routing Table; Routing Table Outline; Routing Table Types - Patton electronics SmartWare R.3.20 Software Configuration Manual

SmartWare Software Configuration Guide
Configure call routing tables
Routing tables are identified by names that can be any arbitrary string. For ease of identification the table type
is typically used as part of the name.
Call router tables are created by entering the
table configuration mode. There you can add, modify or delete entries of the routing tables. Refer to the indi-
vidual table types detailed below on how to configure table entries.
Note
The sequence of the lines is not important. The call router creates a search
tree out of the table lines to ensure optimal search speed.
Note To remove a specific entry of a table, enter the table configuration mode and
use the no-form on a previously entered entry. To remove a whole table, use
the
no

Create a routing table

A routing table forwards the call to another table, interface or service based on a specific call property like the
called party number or the current date. The call router provides a number of different routing table types. A
routing table looks like the following:
Each table contains a header and one or more entries. The header declares the type of the routing table as well
as its name.
The name of the routing table is unique inside the context and serves as identifier for referencing the table
from other tables or interfaces. The routing table type specifies which call property the table shall examine.
Table 12 lists the call properties that can be used as a routing table type.
Type
called-e164
Call router configuration task list
routing-table
form of the
table mode
Type
Name
Key Destination
001 if USVOIP-A
001320 if USVOIP-B
0044 if EUROVOIP
0049 if EUROVOIP
default if DEFACC
Figure 58. Routing table outline
Table 12. Routing table types
Route calls based on the called party E.164 number. Entries of called-e164 tables can
use wildcards to summarize routes. Digit collection can be configured on a per-entry
basis.
command, which also brings you into the routing
command.
called-e164
NATIONAL
Function
ADD-PREFIX
Description
33 • Call router configuration
Header
Entries
389