Mode Overview, 1 Of 3; Introduction - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide

Introduction

Figure 11 on page 642,
chy. Each box contains the mode name, the command to enter in this mode and the mode prompt printed in a
Telnet or console session. The commands are defined in appendix C,
Indicates that there could be more
than one instance of this component
<mode name>
<enter command>
<prompt>
Execution Modes
Operator Exec
-
<hostname>
Administrator Exec
<hostname>#
Introduction
figure 12 on page 643, and
Configuration Modes
Configure
<hostname>(cfg)#
Figure 11. Mode overview, 1 of 3
figure 13 on page 644 show the configuration mode hierar-
"Command summary"
Contexts and interfaces
Context CS
[switch]
<host>(ctx-cs)[<name>]#
Context IP
context ip [router]
<host>(ctx-ip)[<name>]#
B • Mode summary
on page 645.
Complex Function
complex-function <name>
<host>(func)[<name>]#
Interface FXS
interface fxs <name>
<host>(if-fxs)[<name>]#
Interface H323
interface h323 <name>
<host>(if-h323)[<name>]#
Interface ISDN
interface isdn <name>
<host>(if-isdn)[<name>]#
Interface SIP
interface sip <name>
<host>(if-sip)[<name>]#
Mapping Table
mapping-table <name>
<host>(map-tab)[<name>]#
Precall Service Table
precall-service-table <name>
<host>(pcs-tab)[<name>]#
Routing Table
routing-table <name>
<host>(rt-tab)[<name>]#
Service CFNR
service cfnr <name>
<host>(svc-cfnr)[<name>]#
Service Distribute
service distribution-group <name>
<host>(svc-dist)[<name>]#
Service Hunt-Group
service hunt-group <name>
<host>(svc-hunt)[<name>]#
DYNDNS
<host>(dyndns)#
IP Interface
interface <name>
<host>(if-ip)[<name>]#
642