Patton electronics SmartWare R.3.20 Software Configuration Manual page 310

SmartWare Software Configuration Guide
Mode: Context CS
Step
node (ctx-cs)[switch]#show call-router config detail
1
level
node (ctx-cs)[switch]#debug call-router detail level
2
node (ctx-cs)[switch]#no shutdown
3
node (ctx-cs)[switch]#show call-router status detail
4
level
Example: Enable CS Context
The following example shows how to enable the call router debug monitor and how to enable the CS context.
It also shows the output from the call router debug monitor.
node(cfg)#show call-router config detail 5
Table switch/TAB-ISDN-SERVICE:
Key
itc
-------------------------------------------------------------------------------
unrestricted-digital -
default
Table switch/TAB-DEST-A:
Key
called-e164
-------------------------------------------------------------------------------
0
00
07[4-6]
0336652...
default
Table switch/CAC-APPLE:
Key
called-e164
-------------------------------------------------------------------------------
(.%)
...
node(cfg)#debug call-router
node(cfg)#context cs
node(ctx-cs)[switch]#no shutdown
Activating CS context configuration
Command
Value Function
-
-
- -
Value Function
-
- MAP-CAC-ORANGE dest-interface IF-LOCAL-BA
- MAP-CLI-MELON
- MAP-CAC-APPLE
- -
- -
Value Function
called-e164
1055\1 -
26 • CS context overview
Purpose
Show the CS context configuration.
Level could be 1..5. Level 1 shows less,
level 5 shows all information.
Enable the call-router debug monitor.
Level could be 1..5. Level 1 only logs
errors, level 5 shows all relevant infor-
mation to track calls through routing
tables.
Enable the CS context, checks the inter-
face and call router configuration
Show the actual state of the call router.
This includes all configured tables as
they were read-in from the configura-
tion.
Dest-Type Dest-Name
dest-interface IF-LOCAL-BA
dest-table TAB-DEST-A
Dest-Type Dest-Name
dest-interface IF-NODE-C
dest-interface IF-LOCAL-BA
dest-interface IF-NODE-B
dest-interface IF-LOCAL-BA
Dest-Type Dest-Name
- -
310