3Com 3C10402B Administrator's Manual page 542

542 A G: NBX E
PPENDIX
SYNTAX INTEGER {
MAX-ACCESSread-only
STATUS current
DESCRIPTION"An enumeration for giving information on status of the phone."
::= { phoneEntry
-- The Notifications Group Begins here.
-- The power status object is associated to the ncpPowerStatus object from the NCP
table
-- along with the physical name of the entity. Most of the NCP related notifications
are associated to
-- the entPhysicalName so as to inform the manager of the NCP that is sending the
notification
-- incase there are 2 NCP's available. By default the index of the table will be
-- mentioned in the notification if it is associated with the table object.
notifyPowerStatusChangeNOTIFICATION-TYPE
OBJECTS { entPhysicalName,ncpPowerStatus }
STATUS current
DESCRIPTION"Notifies if the one of the redundant power supplies status changes
from on to off and vice versa."
::= { nbxNotifications
-- The IP address is accessed from the MIB 2 IP address table. Therefore the
Notification
-- will be associated with the object of the MIB 2 for IP address entry of the
system.
notifyNCPIPChangeNOTIFICATION-TYPE
OBJECTS { entPhysicalName,ipAdEntAddr}
STATUS current
DESCRIPTION"Notifies if there is a change in the IP
address of the NCP."
::= { nbxNotifications
-- This notifications is fired when the voicemail ports that are available in the
system get
-- exhausted.
notifyVoiceMailPortsExhaustedNOTIFICATION-TYPE
OBJECTS { entPhysicalName,ncpNumberOfVMPorts }
STATUS current
DESCRIPTION"Notifies if the voice mail
ports get exhausted."
MIB
NTERPRISE
15 }
1 }
2 }
online(1),
offline(3),
unknownPhoneStatus(100)
}