3Com 3C10402B Administrator's Manual page 514

514 A G: NBX E
PPENDIX
ncpNumberOfActiveCallsOBJECT-TYPE
SYNTAXInteger32
MAX-ACCESSread-only
STATUScurrent
DESCRIPTION"Indicates a number to track the number of active calls."
::= { ncpEntry
ncpIncomingVTLCallFailuresOBJECT-TYPE
SYNTAX Counter32
MAX-ACCESSread-only
STATUS current
DESCRIPTION"Indicates a Counter to track the number of
Failures"
::= { ncpEntry
ncpOutgoingVTLCallFailuresOBJECT-TYPE
SYNTAX Counter32
MAX-ACCESSread-only
STATUS current
DESCRIPTION"Indicates a Counter to track the number of Outgoing VTL Call
Failures"
::= { ncpEntry
-- Though the Memory free is in MB, to present the accurate value, it is better
-- to use the display string.
ncpMemoryFreeOBJECT-TYPE
SYNTAXDisplayString
MAX-ACCESSread-only
STATUScurrent
DESCRIPTION"Indicates the free Memory in the system"
::= { ncpEntry
-- This is a display string as the number is greater than the maximum value
-- that an integer can store. The value is in GB. So better to display in
-- display string.
ncpDosPartitionFreeOBJECT-TYPE
SYNTAXDisplayString
MAX-ACCESSread-only
STATUScurrent
DESCRIPTION"Indicates the Dos partition that is free"
::= { ncpEntry
-- This is a display string as the number is greater than the maximum value
-- that an integer can store. The value is in GB. So better to display in
MIB
NTERPRISE
1 }
2 }
3 }
4 }
5 }
Incoming VTL Call