Removing A Dial Plan Table - 3Com 3C10402B Administrator's Manual

■
3 Click Normal to see which devices use table ID 1 (in this example) as the
Normal table.
4 Click Least Cost to see which devices use table ID 1 as the Least Cost
table. Each device can use only one normal and one least cost table.
5 To add a device to the Devices Using Table list, click Show All and then
click to select an available device from the list.
6 To add a device:
a If the list does not include any devices, click the check boxes next to
b If the list already has devices, click Show all to display a list of devices
Note: You can toggle between the Show all and Show members only
buttons to display devices that have membership in the device list and the
devices that are not members of the list but which you can add to the list,
and to confirm your changes.
7 Click Apply to make the changes and keep this window open, click OK to
make the changes and close the window, or click Cancel to return to the
previous window without putting the changes into effect.
Removing a You must not remove any of the predefined tables (Internal, Incoming, or
Dial Plan Table Least Cost).
CAUTION: You cannot remove a dial plan table if a device is using it.
To remove the table, first remove all devices from the Devices Using Table
list.
To remove a dial plan table:
1 Click Dial Plan > Tables.
2 Select the table, or tables, that you want to delete and click Remove
Selected. To select all tables, enable the Select check box.
3 Click OK to confirm.
Select a dial plan table for which you want to list associated devices,
which displays:
Dial Plan Table ID — The identification number of the dial plan
■
table as specified in the dial plan configuration file
Dial Plan Table Name — The name of the dial plan table
■
the device extensions that you want to add to the list.
that you can add to the list's membership.
Managing Dial Plan Tables 295