3Com 3C10402B Administrator's Manual page 467

Software keys are tied to the system serial number.
To configure licenses:
1 Log on to NetSet:
a Open your browser and connect to the Call Processor by using its IP
address (example: 192.168.1.190) or host name (example: Home).
b Click Administrator.
c Enter your username and password.
d Click OK.
2 Access and record the Call Processor MAC address:
a In the NBX NetSet - Main Menu window, click Reports.
b Click the System Data tab.
c Record the MAC address.
MAC addresses use colons as separators. Take care to record the Call
Processor MAC Address, not the Music-on-Hold MAC address, which also
appears in the System Data tab.
3 Determine the number of port licenses:
a In NetSet, click Licensing and Upgrades > Licenses.
b Record the number of licenses for the H.323 Gateway.
c Click Add License.
d Enter the License Key (must be purchased) to unlock the license. To
obtain a license key, contact 3Com order management or your
supplier.
e Click OK.
Do NOT click Apply. If you click Apply and then OK, the system warns you
that you have an invalid license.
4 Specify Auto Discovery:
a Click System-Wide Settings.
b Check Auto Discover Line Cards.
c Click OK.
Preparing for Installation 467