3Com 3C10402B Administrator's Manual page 254

254 C 10: SIP-M
HAPTER
O
ODE PERATIONS
telephone, it uses the authentication information you provided to
register with the system and is a member of the Telephones list (click
Telephone Configuration > Telephones).
To add a generic SIP telephone:
1 Log in to the NBX NetSet utility using the administrator login ID and
password.
2 Click User Configuration > Users > Add.
3 Specify telephone user information and an unused extension.
When you click OK or Apply, the system creates the telephone user with a
default password of 1234.
4 Connect the telephone to power and the network. Use the telephone
documentation to configure basic network connectivity.
Typically, your phone gets its address from a DHCP server. You can use the
telephone controls to view the phone's IP address. Scroll through the
phone's menus until you find a display such as preferences or Network
Info.
5 After you find the telephone's IP address, open a browser and type it into
the address line.
Most, but not all telephones, include an embedded web server for local
configuration. Be sure to consult the telephone's documentation if you
cannot access the its configuration interface.
6 After you connect to the telephone's configuration interface, find and
configure connections settings. For example, on a Sipura telephone, you
click the
Admin Login
settings:
Proxy
Display Name
Password
User ID
Use Auth ID
link, and then click the
Specify the IP address of the NBX server.
This field might also be known as SIP Proxy.
Typically, you specify the extension, although this is not
required.
Specify the default password, 1234. The telephone user
can by log in to the NBX NetSet utility and use the
extension as the username and this password to change
the password. Do not use the telephone user interface to
change the password because that password change is not
passed to the database.
Specify the telephone extension.
This field must be set to Yes.
tab to access these
Ext.1