3Com 3C10402B Administrator's Manual page 443

Networked telephony systems
Hide thumbs Also See for 3C10402B:
Table of Contents

Advertisement

Table 83 Configuration and Status Report Headings (continued)
Heading
Description
sesl
TEP performance data. Severely Errored Seconds Line, T1.231
Near End. Number of one-second intervals with either
out-f-frame signals, AIS defects, 390 or more CRC errors, or
four or more frame bit errors.
sesp
TEP performance data. TEP performance data. Severely Errored
Seconds Path, T1.231 Near End. Number of one-second
intervals with either out-of-frame signals, AIS defects, 390 or
more CRC errors, or four or more frame bit errors.
sesr
TEP performance data. Severely Errored Seconds Ratio, G.826
Near End and Far End.
Silence Suppr
The state of the silence suppression setting for this span.
"Default" indicates that the span is set to use the system-wide
setting.
SpId
Span ID.
SpNo
Span number.
Span MAC Address MAC address assigned to this span.
Span Name
Name of span.
SpanNo
Identifying number for a span.
Start Type
Mechanism used to indicate start of a call.
Status
Status of a channel, span, card. Values: Online, Idle, Unknown.
Default: Online
Strip #
Full Text: Strip trailing # from Called Party Number in Setup
Request.
Either enabled or disabled. An advanced configuration setting
for situations where the telephone company equipment
requires special configuration on the system.
TEI
Terminal Equipment Identification number (of BRI board). The
telephone company might provide this number or the system
might assign it, depending on how you purchased the BRI
lines.
TEP Version
The version of software running on the board.
Time Last Seen
Last time activity was recorded for this board.
Timing Mode
Internal: Timing is generated from within the Digital Line Card.
Loop: Timing is taken from the central office.
Trunk to Trunk
Whether call transfers are allowed from one trunk to another.
Values: Enabled (default), Disabled, Restricted, Unrestricted.
TxGudMin
The minimum duration of a transmitted Guard signal.
TxWnkDura
The duration of a transmitted Wink signal.
System-level Troubleshooting
443

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V3000 analogV3000 briV3001rV5000Nbx 100

Table of Contents