Identifying Devices Using Pretranslators For Cli - 3Com 3C10402B Administrator's Manual

PreTranslator Create 2 VTL
/
/
PreTranslatorEntry Create
/
/
PreTranslatorOperation Create
PreTranslatorOperation Create
Identifying Devices
Using Pretranslators
for CLI
Figure 15 shows an example of a pretranslator that removes the "*"
character from VTL calls that originated on a system with the IP address
10.234.208.2 and prepends the site code, 69, of system 10.234.208.2.
Figure 15 Pretranslator to Remove IP Address and Prepend Site Code
To add a pretranslator for VTL caller ID issues:
1 Open your dial plan for editing as described in
Dial Plan"on page
2 Search for the section titled Pretranslators.
3 Add a new pretranslator for each system from which you will be receiving
calls over a VTL.
4 Save the edited dial plan and import it into the system. For more
information, see "Importing and Exporting Dial Plan Configuration Files"
on page 275.
5 Specify the devices that use the pretranslator. See
the Pretranslators (Optional)"
To view a list of devices that use a particular pretranslator to present
Calling Line ID (CLI) information about outgoing calls:
1 Click Dial Plan > Pretranslators.
2 Click a pretranslator or click (None) for devices that have no pretranslator.
3 Click the Device Using CLI tab
If you selected (None), you see a list of devices that do not use a
pretranslator for Calling Line ID.
4 To add a device to the list, click Show All and then click to select an
available device from the list. See
Managing Dial Plan Pretranslators
PreTransId Entry Digits
---------- ----- ------
2
PreTransId Entry OperId Operation
---------- ----- ------ ---------
2
2
274.
on page 338.
Table 58
1 10*234*208*2*
1 1 stripLead
1 2 prepend
"Accessing the
"Adding VTL Devices to
for field descriptions.
299
Value
-----
13
69