3Com 3C10402B Administrator's Manual page 440

440 C 18: T
HAPTER ROUBLESHOOTING
Table 83 Configuration and Status Report Headings (continued)
Heading Description
esp TEP performance data. Errored Seconds, T1.231 Near End and
Far End. The number of one-second intervals with between 2
and 319 CRC errors.
esr TEP performance data. Errored seconds ratio, G.826 Near End
and Far End.
Ext. The extension number for a channel.
fc TEP performance data. Failure Count, T1.231 Near End and Far
End. Total failure count for the sample.
FlashHookTransfer Status of flash hook transfer function. If enabled, allows user
receiving a call to do a flash hook transfer to another trunk line
Values: Enabled, Disabled. Default: Enabled
Framing Type Type of framing used on this board (ES4, D4). For a T1 board,
ESF is always associated with a B8ZS line coding, and D4 is
always associated with AMI line coding.
Framer Loopback The state of the setting for the Framer Loopback test, either
enabled or disabled.
GpId Group ID number.
Group Name Group name.
Guard A time out value that controls the waiting period after a call
completes, before the channel can be used for another
outbound call from system.
InterfaceType Type of interface. Values: E1, T1, ISDN, no config. Default: T1.
Does not apply to T1 E&M.
Interval TEP performance statistics are sampled every 15 minutes. The
system saves up to 24-hours of data in 15-minute intervals.
Intl. Prefix An advanced configuration setting. An identifier, up to
five-digits, that can be manually configured for outgoing calls
on this span. Manual configuration of the international prefix is
for situations where the telephone company equipment
requires special configuration on the system.
Line Code Type of line coding used (HDB3, AMI). For a T1 board, AMI line
coding is always associated with D4 framing, and B8ZS line
coding is always associated with ESF framing.
Line Length Length of the line between the termination and the board.
Line Loopback The state of the setting for the Line Loopback test, either
enabled or disabled.
lofc TEP performance data. Loss Of Frame Count, T1.231 Near End
and Far End. Number of Out-Of-Frame events.