Checking A Telephone's Status; Removing A Telephone; Rebooting A Telephone - 3Com 3C10402B Administrator's Manual

96 C 5: T
HAPTER ELEPHONE
Checking a
Telephone's Status
Removing a
Telephone
Rebooting a
Telephone
C
ONFIGURATION
To check the status of a telephone:
1 Click Telephone Configuration
2 Click the extension of the telephone for which you want a status report.
3 Click the
Status tab
4 View the device status and see the online Help for information about
options.
5 Click OK.
To remove a telephone from the system:
1 Click
Telephone Configuration
2 Select the telephone, or telephones, that you want to delete and click
Remove Selected. To select all telephones, enable the Select check box.
3 Click OK when the dialog box prompts you so that the system removes
the selected telephone.
4 Click User Configuration > Users.
5 Select the extension, or extensions, that you want to delete and click
Remove Selected. To select all telephones, enable the Select check box.
6 Click OK when the dialog box prompts you so that the system deletes the
selected extension.
If you do not delete the telephone user, the extension of the removed
telephone becomes a phantom mailbox.
To reboot a telephone:
1 Click
Telephone Configuration > Telephones
2 Click the extension of the telephone that you want to reboot.
3 Click the tab.
Status
CAUTION: If the telephone has an active call, you will disconnect the call
when you reboot the telephone.
4 Click
Reset Device
You can also reboot a telephone by unplugging the power connector
from the telephone and then plugging it in again.
> Telephones
.
>
Telephones
and then click .
OK
.
.
.