3Com 3C10402B Administrator's Manual page 203

Set the maximum number of out-calling ports
■
Assign an out-dialing prefix for Off-site Notification
■
To configure Off-site Notification, click NBX Messaging > Configure and
click the Off-site Notification tab.
Table 38 provides details on Off-site Notification fields.
Off-site Notification
Table 38
Field
Offsite Notification
Enabled
Max Out-calling Ports The number of voice mail ports available for simultaneous
Out-dialing Prefix
Notes About Off-site Notification
To allow telephone users to take advantage of Enable Off-site
■
Notification, you must perform these three steps:
Click NBX Messaging > Configure and click the Off-site Notification
■
tab to enable Off-site Notification system wide.
Click User Configuration > Class of Service and click the CoS Group
■
Name to enable Off-site Notification in the Class of Service
settings.
Verify that the individual telephone user's extension has been
■
enabled for Off-site Notification.
Before Off-site Notification can send e-mail, define an SMTP Domain
■
Name, and one or more valid Domain Name Servers (click
System-Wide Settings > IP Settings).
Fields
Purpose
Enables Off-site Notification throughout the system. By
default, Off-site Notification is disabled.
When you enable Off-site Notification, you must also enable
it for:
Class of Service Settings. See
■
page 132.
The telephone user's personal settings. See "Off-Site
■
Notification" in the NBX Telephone Guide.
use by Off-site Notification. You can configure this
parameter for up to the number of voice mail ports licensed
for the system. The system is shipped with 4 ports; purchase
an upgrade license to enable additional ports.
A prefix used by every call made by Off-site Notification.
If this setting is empty, the call uses only the information
specified by the telephone user.
NBX Voice Mail
Class of Service (CoS) on
203