3Com NBX Series Quick Reference Manual

NBX

Quick Reference Guide

Hold a Call
To place a call on hold, press Hold. To return to the call,
press the Access button where the call is being held.
The indicator light to the left of a line on hold blinks slowly.
Transfer a Call
1. While you are on a call, press Transfer.
2. Dial the number to which you want to transfer the call.
3. As soon as you hear ringing, press Transfer again
or, when the recipient answers, announce the call and
then press Transfer again.
Conference Calls
1. While you are on the first call, press Conference.
2. Place a call to another party, wait for that party to
answer, and then press Conference again.
3. Repeat steps 1 and 2 to add further parties.
A conference can include up to 4 parties, either internal or
external, as long as there is at least one internal party. The
conference ends when the last internal party hangs up.
n
To place a conference call on hold, press Hold. The
other parties can still talk to each other, but they cannot
hear you.
n
To transfer a conference, press Transfer. Dial the
number to which you want to transfer the call, and as
soon as you hear ringing, press Transfer again.
Call Park — Park a Call
1. While you are on a call, press the Call Park Access
button
or if Call Park is not assigned to an Access button on
your telephone, press the Feature button and dial the
Call Park Feature Code, 444.
2. Dial one of the Call Park Extensions:
Dial Plan NBX 100
3-digit 601-609
4-digit 6001-6009
The call is parked until retrieved or until the caller hangs up.
Call Park — Retrieve a Parked Call
From any NBX telephone, dial the Call Park Extension to
which the call was parked.
Handsfree Answer on Intercom
Press Handsfree. When a call arrives, a tone sounds, and
the speakerphone is activated.
Handsfree works only with internal calls.

Business Telephone
V5000
600-610
6000-6099
Mute a Call (Speakerphone Only)
While you are on the speakerphone, press the Mute button.
You can hear the caller, but the caller cannot hear you.
To enable the microphone, press Mute again.
Call Pickup — Pick Up a Call
1. Pick up the handset.
2. Press the Feature button and then 455 for a direct call
pickup or 456 for a group pickup.
3. Enter the extension or group number as required.
Hunt Groups — Log In and Log Out
1. Pick up the handset.
2. Press the Feature button and then 860.
3. Enter the extension number of the hunt group.
4. Enter the password for the hunt group.
5. To log out, press the Feature button and then 860.
LCD User Directory
1. Press the scroll up button or the scroll down
button on the telephone to access the user
directory in the display panel.
2. Continue scrolling to find the person whom you
want to call, or use the keypad to jump to a name in
the list beginning with a particular letter.
Example: Press 4 once to jump to names beginning
with the letter "G", twice to jump to names beginning
with the letter "H", or three times to jump to names
beginning with the letter "I".
3. The three soft buttons below the LCD display panel are,
from left to right, Slct, Back, and Exit.
n
Press Slct to dial the extension of the displayed name.
n
The Back button is reserved for future use.
n
Press Exit to close the directory.
Volume Adjustment
n
To raise or lower the Handset volume, lift the
handset off the hook and press the preferred
volume control button repeatedly until you hear
the preferred volume.
n
To raise or lower the Speaker volume, press Speaker,
and then press the preferred volumn control button
repeatedly until you reach the preferred volume.
n
To raise or lower the Ringer volume, press the preferred
volume control button while the telephone is ringing.
Set or Change Your Speed Dial Selections
See the NBX Business Telephone Guide or NetSet User Help
for more information.
Part Number: 900-0029-01 Rev AB
Published: January 2001