3Com 3C10402B Administrator's Manual page 438

438 C 18: T
HAPTER ROUBLESHOOTING
Table 83 Configuration and Status Report Headings (continued)
Heading Description
ais TEP performance data. Alarm Indication Signal. The number of
seconds in which an ais was transmitted. An ais signal is
transmitted in lieu of the normal signal to maintain
transmission continuity and indicate to the receiving terminal
that there is a transmission fault located either at the
transmitting terminal or upstream of the transmitting terminal.
Also referred to as a Blue Alarm.
aissp TEP performance data. T1.231 Near End. Number of seconds
when loss of frame encountered.
ANI Automatic Number Identification. The telephone number from
which the call originated.
Audio Input Numeric value of audio input control setting.
Audio Output Numeric value of audio output control setting.
Audio Compr The type of audio compression selected for this span. Default
means that the device is using the system-wide setting.
bbec TEP performance data. G.826 Near End, Far End. Number of E1
background block errors.
bber TEP performance data. G.826 Near End, Far End. Background
block ratio.
bes TEP performance data. Bursty Errored Seconds, TR54016 Far
End and Far End. Number of seconds during which there were
2 to 319 CRC errors, but no Severely Errored Frame or AIS
conditions.
BdId Board (card) ID number.
BdId Name Board (card) name.
Brd The number of the board (card) in a multiple board system.
CO Switch Protocol Protocol (ETS1, QSIG Slave) used by the CO switch (not
applicable to T1).
Card Type Type of card (T1, ISDN PRI, E1, BRI).
Ch MAC Address Channel MAC address.
Ch List Channels supported by a DSP.
Ch Name Name of a channel.
ChId Unique identifying number of a channel in a list of channels,
possibly including channels from more than one board.
ChNo Channel number. For example: 1–24 for a T1 board.
css TEP performance data. Controlled Slip Seconds, TR54016 Near
End and Far End. Number of seconds of controlled (benign)
slips.