Dial Plan Tables - 3Com 3C10402B Administrator's Manual

Networked telephony systems
Hide thumbs Also See for 3C10402B:
Table of Contents

Advertisement

Dial Plan Tables

Off-Site Notification
The system uses off-site notification to notify telephone users when new
voice mail messages arrive. You can define notification devices and assign
them in the Internal dial plan as well as through the NBX NetSet utility.
Example: When voice mail arrives, the system dials the telephone
number of the telephone user's pager. Typically, you use a system-wide
prefix to designate the device or devices you want to use for outdialing
purposes, including off-site notification calls.
Example: If the telephone user's pager number is 800-555-3751, and
the system-wide prefix digit is 9, the system dials 98005553751 to send
a call to the telephone user's pager.
To instruct the system to dial a single Line Card port or a restricted
number of Line Card ports, create a suitable pool of Line Card ports for
that purpose, and then use an existing set of dial plan table entries (such
as the entries that begin with 8) or create a new set of entries to allow
the dial plan devices to route calls by means of the selected line card
ports.
Example: You set up one 4-port card to manage all off-site notification
calls. You create a set of entries in the Internal dial plan table that each
start with the digit 8. You define a route to the 4-port card for all of these
dial plan entries so that whenever the system acts on one of these entries,
it uses one of the 4 ports on that card to dial out and notify the
telephone user.
To apply different off-site CoS restrictions to different telephone users,
you need multiple dial plan entries. If you are not applying the CoS
restrictions, then a single dial plan entry is sufficient.
Dial plan tables contain information that controls how the system routes
calls. Each dial plan configuration file consists of at least three dial plan
tables. This section discusses these topics:
Dial Plan Command Format
Internal Dial Plan Table
Incoming Dial Plan Table
Least Cost Routing Dial Plan Table
— Must be table ID 1
— Must be table ID 2
— Must be table ID 3
Dial Plan Tables
263

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V3000 analogV3000 briV3001rV5000Nbx 100

Table of Contents