3Com 3C10402B Administrator's Manual page 243

requires one system device license. See
on page 237 for more information.
8 Type the voice mail extension that end users can dial to access the Auto
Attendant.
9 Type the interval for subscriber data updates to the IP Messaging Module.
Subscriber data uploads only if extension numbers are unique. System
subscriber data is written to an XML file at the specified interval. See the
next topic, "Mailbox Creation Details"
10 Type the password (the default password is nice), that is used to access
the IP Messaging Module.
11 Click Send Update Now for an immediate upload of subscriber data to
the IP Messaging Module.
12 Click OK or Apply to save your changes.
When you click Apply, the system adds the IP Messaging Module as a
trusted endpoint. Click SIP Applications > Trusted SIP Interfaces to verify.
Mailbox Creation Details
When you use the NBX NetSet utility to create a new telephone user, the
system communicates with the IP Messaging Module, which then creates
a new mailbox. This communication method from the system to the IP
Messaging Module is not in real time. The system creates an XML file that
includes the new user information and sends it to the IP Messaging
Module at defined intervals. You can also manually execute an immediate
file transfer. At defined intervals (the default is every six hours), the IP
Messaging server collects the XML files from one or more systems,
combines the information into one update file, and then creates the new
mailboxes. The process incudes these steps:
When you create a new telephone user or a new trusted interface on
■
the system, the system creates an XML file that includes all the
information that the IP Messaging Module requires to create a
corresponding mailbox. The file is named
<NBXSYSID>_nbxuserpwd.xml
If a new file has been created, that is, if the system needs to create
■
new mailboxes on the IP Messaging Module, the system transfers the
file to the IP Messaging Module at defined intervals. The interval is set
in the NBX NetSet utility (click SIP Applications > IP Messaging). You
can also force an immediate update from this window.
Enabling and Configuring SIP Mode
"Licensing and Resource Limits"
for further details.
.
243