Configuration and
Status Reports
Table 82 3C10165D and 3C10116D Status Lights and Error Conditions
Status Light
Purpose
CO
Green: There are no error or alarm conditions.
Amber: An alarm condition at the remote end or the CO is
not connected or available. To determine which alarm state
exists:
1 Log on to the NBX NetSet utility using the administrator ID
2 Click PSTN Gateway Configuration > Digital Line Cards.
3 In the Select Device Type list, select T1 Spans or ISDN PRI
4 Select the span you want and click Status. The words Red
You can obtain the status of all Digital Line Cards in the system with
either of these two methods:
Select PSTN Gateway Configuration > Digital Line Cards and:
Click Config & Status Report, which displays a formatted report with
■
headings shown in a larger font in the window.
Click Export Report, which displays an unformatted report in the
■
window. To save the report as an ASCII text file, select Save as from
the File menu of your browser.
Table 83
describes in alphabetical order (not the order of appearance) the
headings in the Configuration and Status Report.
Table 83 Configuration and Status Report Headings
Heading
Description
#Chs
Number of channels.
#Dsp
Number of digital signal processors.
#OffChs
Number of channels in the offline state.
#OnChs
Number of channels in the online state.
AEClosed
Autoattendant extension when business is closed.
AELunch
Autoattendant extension when business is at lunch.
AEOpen
Autoattendant extension when business is open.
AEOther
Autoattendant extension for Other hours.
System-level Troubleshooting
and password.
Spans, and then click Apply.
Alarm or Blue Alarm appear in the Status field.
437