3Com 3C10402B Administrator's Manual page 28

28 C 2: S
HAPTER YSTEM
Table 4 Auto Discovery Actions on System Components
Component
Analog Line Card and
V3000 analog line ports
Digital Line Card
3Com Telephones
Analog Terminal Cards
Analog Terminal Adapters
V3000 ATA port
3Com Attendant Console
pcXset
Soft Telephone
ConneXtions H.323 Gateway Configures line card port settings when the following conditions are true:
S
ETTINGS
The system does not discover licensed devices until you enter the
appropriate Group License. For more information about Group Licensing,
see the NBX Installation Guide.
Table 4 summarizes Auto Discovery actions for system components.
Auto Discover Action
Gathers configuration information from each port on the card, assigns a default
extension, and enters the information into the configuration database.
Gathers configuration information from the card, assigns a default extension, and
enters the information into the configuration database.
After you Auto Discover the Digital Line Card, you might need to edit the dial plan to
configure Direct Inward Dial (DID) numbers.
Gathers configuration information from the telephone, assigns a default User Profile
labeled new user, assigns the next lowest available extension number to the profile,
and enters the information into the configuration database.
Auto Discover Telephones finds both Analog Terminal Cards and Analog Terminal
Adapters.
By default, the Auto Discover process assigns extension number 1000 (4-digit dial
plan) or 100 (3-digit dial plan) as the first telephone extension. You can use the NBX
NetSet utility to specify a new extension starting number. To simplify Auto Attendant
configuration, start a range at a base number, for example, 1000/100, 2000/200,
3000/300, or 4000/400. The default Auto Attendant assumes that extension 1000
(4-digit dial plan) or 100 (3-digit dial plan) is the extension of a human attendant
(receptionist).
Finds and configures any installed 3Com Attendant Consoles. The system maps the
first 100 existing telephones, except for the extension that is associated with the
Attendant Console, to Attendant Console buttons. The lowest extension is
automatically associated with the Attendant Console. Typically, you enable Auto
Discover Attendant Consoles after you have installed all your telephones.
Enables the Auto Discover feature on installations of the pcXset PC Telephone Client
when the following conditions are true:
The pcXset PC Soft Telephone program is running on the host PC.
■
The pcXset PC Soft Telephone host computer is connected to the network.
■
You have entered the proper license key into the NBX NetSet utility.
■
The ConneXtions H.323 Gateway program is running.
■
The ConneXtions H.323 Gateway host computer is connected to the network.
■
You have entered the proper license key into the NBX NetSet utility.
■