3Com 3C10402B Administrator's Manual page 324

324 C 11: D P
HAPTER IAL LAN
software does not use the priority value, the system leaves 0 (zero) as the
value, and assigns the call to route 1 (the route that uses the 4-port card).
TableEntry Create 1 49 91617 12 12 LongDistance 0 1
Explanation: In table ID 1 (the Internal table), creates entry 49, which
directs the system to look for the digits 91617 at the beginning of any
12-digit sequence (Min and Max are both 12). If the system detects such
a sequence, it assigns LongDistance as the class of service. Because the
system software does not use the priority value, the system leaves 0 (zero)
as the value, and assigns the call to route 1 (the route that uses the 4-port
card).
TableEntry Create 1 50 91781 12 12 LongDistance 0 1
Explanation: In table ID 1 (the Internal table), creates entry 50, which
directs the system to look for the digits 91781 at the beginning of any
12-digit sequence (Min and Max are both 12). If the system detects such
a sequence, it assigns LongDistance as the class of service. Because the
system software does not use the priority value, the system leaves 0 (zero)
as the value, and assigns the call to route 1 (the route that uses the 4-port
card).
TableEntry Create 1 51 91978 7 7 LongDistance 0 1
Explanation: In table ID 1 (the Internal table), creates entry 51, which
directs the system to look for the digits 91978 at the beginning of any
12-digit sequence (Min and Max are both 12). If the system detects such
a sequence, it assigns LongDistance as the class of service. Because the
system software does not use the priority value, the system leaves 0 (zero)
as the value, and assigns the call to route 1 (the route that uses the 4-port
card).
In combination, the five lines in the internal table work with these two
lines in the Routes section of the dial plan.
DestinationRoute Create 1 Boston Low-cost Carrier
DestinationRoute Create 2 T1 Line to DEF Telephone Company
Explanation: Creates two routes, numbered 1 and 2, with the names
"Boston Low-cost Carrier" and "T1 Line to DEF Telephone Company."
DestinationRouteEntry Create 1 1 *0001
DestinationRouteEntry Create 2 1 *0001
Explanation: In route 1, creates entry number 1, which defines
extension list *0001 (TLIM extensions) as the destination. Then creates, in
route 2, an entry that defines extension list *0002 (Digital Line Card
extensions) as the destination.