Generating A Dial Plan Report - 3Com 3C10402B Administrator's Manual

280 C 11: D
HAPTER IAL
Generating a
Dial Plan Report
P
LAN
To create and run a test using the currently loaded dial plan:
1 Click Dial Plan > Configure.
2 Click the Test tab to display the list of extensions from which you can call.
3 Click the extension from which you want to dial for the test.
4 In Number to dial, enter the number that you want the system to dial.
5 Select the desired date and time in the Day/Time pull-down lists.
For some tests, the day and time settings are irrelevant. You can leave the
settings at their default values (Sunday, 00, and 00).
6 Click Test. The test runs and the results appear in the dialog box.
This section describes how to create a report that contains all dial plan
settings, tables, routes, and pretranslators. Also, the report:
Performs a consistency check to ensure that all dial plan table entries
■
point to valid routes which, in turn, point to valid extensions.
Identifies how many devices are using each dial plan table and each
■
pretranslator.
To generate a dial plan report:
1 Click Dial Plan > Configure.
2 Click Reports, which displays the dial plan report in the browser window.
Errors can prevent calls from being successfully routed. Warnings are
conditions that you can easily correct to route the call successfully.
To record test results and send them to someone, select the text in the
results pane and use the browser's copy function (typically found in the
Edit menu) to copy the test results to another application window, such
as an editor or e-mail.
3 Click Close.
The person who validates the dial plan test is responsible for verifying
that the test call used the correct dial plan table and dial plan table entry.
Be aware of these common dial plan problems:
Dial plan table entries that point to nonexistent routes
■
Timed route entries that point to nonexistent destination routes
■