Initial System Configuration - 3Com 3C10402B Administrator's Manual

Initial System To use the Auto Discover feature for initial system configuration:
Configuration
1 Log in to the NBX NetSet utility using the administrator username and
password.
2 Click
3 Verify that the Extensions Start At field is set to what you want, and then
click Apply.
For a 4-digit dial plan, extensions start by default at 1000. For a 3-digit
dial plan, extensions start at 100.
Do not specify a starting extension that begins with zero (0), which will
cause the Auto Discover process to fail.
4 Click
5 Select the check box for the device type that you are configuring and click
Apply.
3Com recommends that you Auto Discover one device type at a time. See
the online Help for detailed information about each field.
Auto Discovery Notes
■
■
■
■
System-Wide Settings > Enable Features System-Wide.
System-Wide Settings > Auto Discovery
If devices are on a different subnet from the Call Processor, enable IP
on the Call Processor (System-Wide Settings > IP Settings), and each
device must have IP configuration information.
You can use DHCP to configure the telephones. You must configure
the DHCP server to provide the Call Processor IP address through
option 184. Also, you can use the keypad to program IP settings into
each device. See "Configuring Option 184 on a Windows 2000 DHCP
Server" on page 457
Local User Interface Utility"
programming instructions.
The Auto Discovery and software download processes might take a
few moments to complete. The Call Processor initializes devices one at
a time. If you have connected many new devices to the system at the
same time, the Auto Discovery process requires more time.
A fully initialized telephone displays its extension and the date and
time. If there are no extensions available, the Auto Discover process
fails, and the telephone's display panel continues to display the
telephone's MAC address.
.
for DHCP information and
on page 413 for telephone local
Auto Discovery 29
"Using the Telephone