3Com 3C10402B Administrator's Manual page 392

392 C 16: N
HAPTER ETWORK
M
ANAGEMENT
Some of the operating system daemons and processes have been
assigned Facilities values. Processes and daemons that have not been
explicitly assigned a Facility might use any of the local use facilities, or
they might use the user-level Facility.
Those Facilities that have been designated are shown in
with their numerical code values.
Table 71 Facility Codes
Code Value Facility Code
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
Various operating systems have been found to utilize Facilities
■
4, 10, 13 and 14 for security/authorization, audit, and alert
messages which seem to be similar.
5 messages generated internally by Syslog
6 Line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon
Various operating systems have been found to utilize both
■
Facilities 9 and 15 for clock (cron/at) messages.
10 security/authorization messages
Various operating systems have been found to utilize Facilities
■
4, 10, 13 and 14 for security/authorization, audit, and alert
messages which seem to be similar.
11 FTP daemon
12 NTP subsystem
13 log audit
Various operating systems have been found to utilize Facilities
■
4, 10, 13 and 14 for security/authorization, audit, and alert
messages which seem to be similar.
14 log alert
Various operating systems have been found to utilize Facilities
■
4, 10, 13 and 14 for security/authorization, audit, and alert
messages which seem to be similar.
Table 71 along