Mibs Used On The System - 3Com 3C10402B Administrator's Manual

MIBs Used on the
System
Agent Conformance Reference
■
Network Management Applications
■
Applicable Endpoints
■
The system supports these public MIBs as read-only objects:
Table 68 Standard MIBS Supported by the System
RFC Description
RFC 1155 Structure and Management
Information for TCP/IP
Networks
RFC 1157 SNMP
RFC 1213 MIB-II
RFC 1215 Defining Traps
RFC 1901 SNMPv2
RFC 1907 SNMPv2 MIBs
RFC 2571 SNMP Management
Frameworks
RFC 2572 SNMP Message Processing and
Dispatching
RFC 2573 SNMP Applications
RFC 2574 User-based Security Model for
SNMPv3
RFC 2575 View-based Access Control
Model (VACM)
RFC 2576 Co-existence Among SNMPv1,
SNMPv2, and SNMPv3
RFC 2737 Entity MIB
Refer to "Standard SNMPv3 MIBs" on page 380
The system also uses the 3Com NBX Enterprise MIB (a private MIB) to
show gateway and telephone information. To examine the 3Com private
MIB, see to "NBX Enterprise MIB" on page 511
MIBs and MIB Objects
Notes
Fully supported.
Fully supported.
Does not support egp and cmot
groups.
Does not support the 'warm-start'
trap.
You cannot do SNMP SET on any of
the objects by default using either V1
or V2. Read/Write access is removed
for the SNMP V1, V2 versions.
Fully supported.
Fully supported.
Fully supported.
Fully supported.
Fully supported.
Context names are restricted to
monitor (read only) and admin
(read/write).
Fully supported.
Only the EntPhysicalTable is
supported.
for more information.
in this guide.
379