3Com 3C10402B Administrator's Manual page 352

Networked telephony systems
Hide thumbs Also See for 3C10402B:
Table of Contents

Advertisement

352
C
12: V
HAPTER
IRTUAL
C
ONNECTIONS
Table 64 TAPI Route Points and System Features (continued)
Call Redirected to
External number
Call Park extension
Hunt Group extension
Hunt Group member
Phantom Mailbox
Mapped Line
Bridged Station
Appearance
Configurable Operator Calls can be redirected to a System Operator or a Personal
Description
Subject to the route point extension's Class of Service
setting.
The call connects as soon as the external line resource (line
card port, a PRI line, or a T1 channel) is acquired. The caller
hears the call progress tones directly from the CO. At this
point, the system logs a successful connection. Calls
redirected to an external number cannot timeout, even if
the call was redirected to a busy or an invalid number.
If a call has been previously parked at the specified Call
Park extension, the redirected call is connected to the
parked call.
If no call is waiting at the specified Call Park extension, the
call returns to its original destination when the TAPI Line
Redirect Timeout expires and the external application can
redirect it again. After two failures, the call goes to the Call
Coverage specified for the Route Point.
Calls redirected to a Hunt Group extension do not timeout.
Once the call is passed to the Hunt Group, the system
reports that the call has been successfully redirected.
Calls can be redirected from a Hunt Group extension.
You cannot add a TAPI Route Point extension to a Hunt
Group.
A Hunt Group takes precedence over a Route Point. If a call
arrives on a Hunt Group member telephone because it is a
member of a Hunt Group, a redirect is not permitted. If a
call arrives on the phone's extension (not as a result of a
Hunt Group action), the call can be redirected.
A call can be redirected to a phantom mailbox.
Calls that arrive through an incoming line that is mapped
to a line appearance button on a telephone cannot be
redirected.
If you redirect a call to a mapped line, the call does not
timeout. It fails and is routed back to the route group until
the caller disconnects.
Calls can be redirected to or from a telephone that has a
bridged station appearance. Once a call to a primary
bridged station appearance reaches the secondary bridge
station appearance, the call cannot be redirected.
Operator.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V3000 analogV3000 briV3001rV5000Nbx 100

Table of Contents