Verifying Line Card Port Status; Rebooting A Line Card Port; Advanced Settings - 3Com 3C10402B Administrator's Manual

Verifying Line Card
Port Status
Rebooting a
Line Card Port

Advanced Settings

To remove a line card port:
1 Click
PSTN Gateway Configuration
2 Select the extension, or extensions, of the line card port that you want to
delete and click Remove Selected. To select all extensions, enable the
Select check box.
3 Click OK when the system prompts you to confirm.
You can verify the status of a configured line card port at any time.
To view the status of a line card port:
1 Click
PSTN Gateway Configuration
2 Click the extension of the line card port.
3 Click the Status tab.
4 See the online Help for more information.
To reboot a line card port:
1 Click
PSTN Gateway Configuration
2 Click the extension of the line card port.
3 Click the Status tab.
4 Click Reset Device.
CAUTION: On the 3C10117 Analog Line Card, you can reboot individual
ports without affecting the other ports. However, if you reboot an analog
port on the 3C10114C or 3C10114D Analog Line Card, the system
reboots all ports on the card. This action can disrupt active telephone calls
on any of these ports.
The Advanced Settings window enables you to set the audio gain and
timing controls on each port of an Analog Line Card.
To set these parameters:
1 Click PSTN Gateway Configuration > Analog Line Cards.
2 Click the extension of the line card port.
3 Click the Advanced Settings tab.
Configuring and Managing Analog Line Card Ports
> Analog Line Cards.
> Analog Line Cards.
> Analog Line Cards.
161