3Com 3C10402B Administrator's Manual page 123

might offer appropriate adapters. The adapter you choose must use the
pinout configuration shown in
Table 23 Pinouts for 3105 Serial Connection
RJ45 pin DB9 pin
1 9
2 1
3 4
4 5
5 2
6 3
7 8
To connect a computer to the serial port on a 3105 Attendant Console:
1 Connect the DE9S to EIA-561 adapter to a serial port on the computer.
2 Connect a straight CAT5 cable (no crossover) from the RJ45 connector on
the adapter to the SERIAL 10101 port on the underside of the 3105
Attendant Console.
3 Start terminal emulation software on the computer and create a new
connection.
4 Configure the connection to use the settings in
Table 24 Terminal Emulation Program Properties
Property
Emulation
Baud Rate
Data bits
Parity
Stop bits
Flow control
5 Use the commands in
Console. Make sure you specify IP and MAC address information
appropriate for your network. Note that NCP refers to the Call Processor.
For example:
nbxSetIpAddress 192.168.123.123
Configuring the Attendant Console
Table 23.
Function
RI
DCD
DTR
GND
RXD
TXD
CTS
Value
VT100
9600
8
None
1
None
Table 25 to configure the 3Com 3105 Attendant
Table 24.
123