204
C
9: NBX M
HAPTER
Status
ESSAGING
When you use Off-site Notification:
■
If you choose Pager or Voice Mail as the first notification method,
■
the system notifies you only of the first new message you receive
after the time you have most recently logged in to your voice
mailbox. The system does not notify you each time you receive a
new message. The next time you log on to your voice mailbox,
Off-site Notification is re-enabled.
If you choose EMail as the first notification method, you receive a
■
notice for each message. The system attaches the message to the
e-mail as a .WAV file. If you configure any method in any of the
remaining four attempt lines, the system also attempts each
specified method for each new voice mail message.
If you configure more than one notification attempts, configure
■
them in order. For example, if you configure three attempts,
configure them on lines 1 through 3, without unconfigured lines in
between.
If you disable NBX Messaging in favor of another messaging
■
application, the Offsite Notification is unavailable.
To view the status of all voice mail ports on this system, click NBX
Messaging > Configure and click the Status tab.
You can also reset a voice mail port. Select the extension, or extensions,
that you want to reset and click Reset. To select all extensions, enable the
Select check box.
Table 39
explains the information in the Status window.
Table 39 Fields in the Status Window
Column
Extension
Name
Purpose
The extension that is associated with the voice mail port.
The name that is associated with the voice mail port.