3Com 3C10402B Administrator's Manual page 529

MAX-ACCESSread-only
STATUS current
DESCRIPTION"The status of the span, whether
::= { dlcSpanEntry
-- This object exists only for BRI Span. For the other spans i could not find a
-- mention of that.
dlcSpanTEIManualAuto OBJECT-TYPE
SYNTAX INTEGER {
MAX-ACCESSread-only
STATUS current
DESCRIPTION"The status of the TEI Assignment. If it is
configured to automatic then auto(2) is returned else
manual(1) is returned. If it doesnot exist notApplicable is returned."
::={ dlcSpanEntry
dlcSpanTEIIdOBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESSread-only
STATUS current
DESCRIPTION" The TEI ID of the span if exists."
::={ dlcSpanEntry
dlcChannelTableOBJECT-TYPE
SYNTAXSEQUENCE
MAX-ACCESSnot-accessible
STATUScurrent
DESCRIPTION"This table consists of the details regarding the channels
in the NBX. These include the T1,E1,PRI,BRI etc."
::= { gatewayDLC
dlcChannelEntryOBJECT-TYPE
SYNTAXDlcChannelEntry
MAX-ACCESSnot-accessible
STATUScurrent
DESCRIPTION"Indicates an entry for each of the Channel in the DLC"
INDEX { dlcChannelDeviceId
::= { dlcChannelTable 1 }
online, offline, unknown, etc."
13 }
manual(1),
auto(2) ,
notApplicable(100)
}
14}
15}
OF DlcChannelEntry
2 }
}
unknownSpanStatus(100)
}
529