3Com 3C10402B Administrator's Manual page 427

Table 79 LUI Menu Items (continued)
Menu Option Description
4 Forced Operations SW Upgrade — Resets the device. You
can perform the same task by removing power from the
telephone. Forces the telephone to retrieve an image from the
downloader.
5 Hardware Reset — Resets the telephone and starts with the
bootstrap code.
6 Ping H3/IP — Runs an H3 IP ping test. See
more information.
7 Test - LED & LCD — Turns on all LEDs for 5 seconds, then fills
every pixel on the display panel for 5 seconds.
8 Test - Buttons — Puts the telephone in the button test state.
Press any telephone button to see a description of the button's
function. To return to the main menu, press the pound ( #)
button twice:
9 Audio Collection — Allows user to specify a PC address to
store audio packets when the user is on call. Used to debug
audio quality issues that might arise in the field.
7 Reserved Reserved for future use (except on 3101B and 3102B Business
Telephones).
7 VCX Config On 3103B and 3102B Business Telephones only:
Menu
Not used in an NBX environment. 3Com telephones can operate
as SIP clients for the 3Com VCX Telephone System. This option
opens a submenu that allows you to set telephone operating
settings for a VCX environment.
8 Test LED & LCD Note: See menu option 6 Advanced Settings for information
about how to access this option on 3101B and 3102B Business
Telephones.
On all 3Com Business Telephones and 3Com 3101 and 3101SP
Basic Telephones, turns on all LEDs for 5 seconds, then fills every
pixel on the display panel for 5 seconds.
On all 3Com Basic Telephones, turns on the icons and words on
the right side of the display panel for 5 seconds.
Icons: Telephone icon plus the number 1 (top line) and
telephone icon plus the number 2 (bottom line)
Words: FWD (top line) and IN (bottom line).
8 Diagnostics On 3103B and 3102B Business Telephones only:
Runs diagnostics. This option requires a password.
Using the Telephone Local User Interface Utility 427
Using H3PingIP for