3Com 3C10402B Administrator's Manual page 252

252 C 10: SIP-M
HAPTER
/
/
DestinationRoute Create
/
/
DestinationRouteEntry Create
/ Extension List *0900 holds the internal extension of 3Com IP Conferencing Module
/
/
Table Entry Create
O
ODE PERATIONS
Dial Plan and 3Com IP Conferencing Module Configuration
You must configure the dial plan to complete the 3Com IP Conferencing
Module configuration. The following procedure describes the process. For
complete dial plan information, see
1 Add an extension list to the dial plan to support routing of extensions to
the 3Com IP Conferencing Module.
For example, you can define the 3Com IP Conferencing Module
extension list as follows:
Route
-----
900
Route
-----
9
2 Create a route entry in the dial plan for the dialed-in digits the telephone
user of the 3Com IP Conferencing Module enters.
For example, using the extension list created in Step 1, the entry below
shows a dial-in that begins with 900.
ID Entry Digits
--- ----- ------
1 6 900
Therefore, if the caller dials 900, the system receives the extension of the
3Com IP Conferencing Module and the port number for the private
conference from the dial plan. The system can route the call to the 3Com
IP Conferencing Module.
3Com Public IP Conferencing Module Configuration
You must configure the dial plan to complete the 3Com Public IP
Conferencing Module configuration. The dial plan uses the private
conference dial plan if it is configured; otherwise, you need to configure
the dial plan for Public conference.
"Dial Plan"
Description
-----------
Conference
Entry DestinationExtension
----- --------------------
1 *0900
Min Max Class
--- --- -----
3 3 internal
on page 257.
Prio Route
---- -----
0 900