Integrating Third -Party Messaging; Installing Software On The Third-Party Messaging Server - 3Com 3C10402B Administrator's Manual

A
Installing Software
on the Third-Party
Messaging Server
I
NTEGRATING
M
ESSAGING
The system can operate with a third-party messaging system. This
appendix describes the steps that you must perform to use a third-party
messaging system with the system:

Installing Software on the Third-Party Messaging Server

■
Configuring the System
■
Configuring NBXTSP on the Server
■
If you are using the 3Com IP Messaging Module with a SIP -mode system,
do not follow the instructions in this chapter. See the IP Messaging
Module Installation Guide, which is available through the NBX NetSet
utility (click Downloads > Documentation).
You must install the NBX Media Driver and the NBX TAPI Service Provider
(NBXTSP) on the third-party messaging server to enable it to interact with
the system. See your messaging application's documentation for server
requirements.
1 Install the NBX Media Driver application from the NBX Resource Pack
DVD or the NBX Partner Access web site.
2 Install the NBXTSP software from the NBX Resource Pack DVD or the NBX
Partner Access web site.
You can also download the NBXTSP software from your system by
connecting to the NBX NetSet utility from a browser located on the
third-party messaging server.
T -P
HIRD ARTY